A CLASSIC REMASTERED
With the newest firmware the Tripodmaker Classic can deliver amazing quality at a competitive price. Features are extended with a pause and resume program, automatic material loading and unloading and a semi-manual calibration setup accessible from our controller screen.
GET STARTED RIGHT OUT OF THE BOX
A modified Repetier Host with slicer profiles included.
PAUSE AND RESUME
Continue your print, even the day after.
Limited weight due to our delta robot set-up equals speed.
WORK STAND ALONE
Use our controller with SD card support and unhook your pc.
Magnetic ball joints suspended hot-end.
A 30 cm diameter build plate with 39 cm build height.
GREAT SURFACE FINISH
A full metal hot-end at your service.
A competitive price.
Makes your print stick better.
An automatic update of your computer or an unplugged USB cable just stops your printer if you are not printing stand alone. With our stand alone controller, there is no need for a computer wired to your 3D printer. Start, pause-resume, stop and tune your printer straight from the screen.
Pause-Resume allows you to pause your print and resume is afterwards. This gives you the time to swap your filament, but also to continue printing when getting back at your office.
Calibration procedure is a method which allows you to easily level your printer on the controller of the printer. The printer head moves near the set screws and guides you through the levelling procedure
PREDEFINED SLICER PROFILES
With a preconfigured Repetier host, there is minimal tweaking to get your objects sliced.
RIGID ALUMINUM DELTA FRAME
The TripodMaker moves its hot-end by moving three carts in a vertical way. These move up and down the aluminium frame and push the hot-end around a static build platform. Less moving weight and a robust frame, results in an improved print quality compared to Cartesian printers.
A FULL METAL HOT-END FLOATING UNDER MAGNETS
Reliability combined with safety and easy maintenance
With no PEEK or PTFE in hot regions, we increased the reliability and safety of our Tripodmaker delta 3D printer by eliminating hot-end meltdowns. The full metal hot-end is built so the nozzle tip can be removed easily for maintenance purposes. Thermistor and heater cartridge are securely locked with screws.
Having a heated bed reduces the warping of your printed parts and increases the adhesion onto the build platform.
BIG BUILD VOLUME
Build platform of 30 cm diameter and print object up to 39 cm high.
|technology||FDM (Fused Deposition modeling)|
|dimensions||42 cm x 53 cm x 101 cm|
|print area||Ø 30 cm x 39 cm|
|nozzle||Ø 0.4 mm; full metal - up to 295°C|
|heated bed||up to 95°C|
|power||AC input: 88 - 264 V; 47 - 63 Hz; 5A|
|plastics||PLA; PETG; HIPS; ABS; Nylon; Polycarbonate|
|software||Repetier host with CuraEngine|
|supported||Windows XP and higher; Mac OS X 10.6 and higher|
|Connectivty||SD card for printing; USB for firmware upload|
|bed leveling||Manually assisted - Adjustable with 3 screws|
|layer thickness / resolution||75 micron - 250 micron|
|machine tolerance||0.1 mm|